FLEXIM - FLUXUS F502 TE - Thermal Energy Meter - Non-Invasive Heat and Cold Metering

Non-Invasive Heat and Cold Metering

Non-Invasive Thermal Energy Metering

The FLUXUS F502 Thermal Energy is specially designed for heat and cold quantity metering in buildings and within the manufacturing industry.

Like all measuring systems of the FLUXUS series, the F502 Thermal Energy measures the volumetric flow rate non-invasively via its clamp-on ultrasonic transducers. Simultaneously temperature probes monitor the temperatures at the supply and return lines of the heating or cooling system - either non-invasively with clamp-on technology or by use of wetted temperature probes.
From the temperature difference as well as the measured volume flow rate and on the basis of the physical media parameters stored in the internal database of the transmitter, the heating or cooling performance is calculated. With the help of the built-in totalizer function the FLUXUS F502 Thermal Energy can also be used as an energy meter. The integrated Modbus RTU, BACnet MS / TP or M-Bus communication interfaces provide for data exchange with the building automation system.

Both the ultrasonic transducers and temperature probes are carefully paired and matched by FLEXIM. Due to these processes, the system measures with a high degree of accuracy and repeatability - even in applications with only small temperature differences, such as in cooling water circuits.

An important advantage of FLUXUS F502 Thermal Energy lies within its high zero point stability and unrivalled accuracy even at very low flow rates - signal drift and significant measurement uncertainty, as it can often be observed at magnetive-inductive heat quantity meters when measuring at low flow rates, can be ruled out. Moreover, even potential mineral deposits on the inner pipe wall cannot influence the measurement.

Thus, the FLUXUS F502 Thermal Energy offers the best metrological basis in terms of precision, long-life time, maintenance-free as well as cost-effective monitoring of thermal energy flows in buildings and manufacturing plants and thus forms the foundation for further process optimization tasks within the scope of a holistic energy management system - e.g. according to DIN ISO 50001.

Non-Invasive Heat and Cold Metering - FLUXUS F502 TE Thermal Energy


  • Reliable and wearfree measurement from outside
  • Accurate thermal energy measurement due to:
    - highly accurate flow measurement with paired and traceable calibrated ultrasonic transducers
    - highly accurate temperature measurement with paired and traceable calibrated temperature sensors (acc. to DIN EN 1434-1)
  • Extremely high measuring dynamics from the lowest to the highest flow velocities - captures even the slightest flows during night time
  • Simple, cost-effective retrofitting without any disruption to supply
  • Tamper-proof storage of measuring data


    Technical Facts

    Measuring quantities
    Heat Quantity (Volume Flow, Mass Flow, Flow Velocity)
    Water and Water / Glycol Mixtures (with up to 6% of gaseous or solid entrainments by volume)
    Flow channels
    Media temperature
    -40 °F ... +212 °F
    Operating temperature of the transmitter
    14 °F ... +140 °F
    Pipe diameter range
    2 inch ... 20 inch
    Flow velocity range
    0,01 ... 25 m/s
    Measurement accuracy
    Volume Flow: ± 2 % of reading, ±0.01 m/s
    Measurement accuracy
    Temperature: ± 0,01% of reading, ± 0,03 K
    ± 0,25% of reading, ±0,01 m/s
    Degree of protection
    Transmitter: IP65 / Transducers: IP67
    1x (2x optional) current, 1x (2x optional) binary
    Communication Protocol
    RS485 or Modbus RTU or BACnet MS/TP or M-Bus

    360° view


    For the manual 360° view pull the image left or right



    Technical Specification

    Energy Efficiency - District Heating and Cooling


    FLEXIM Sustainability - Energy Efficiency - Continuous Commissioning - Building Optimization

    Scroll to top