The Portable Multi-Functional Flowmeter

Unmatched in Performance -The portable liquids Flowmeter for any purpose

The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters.

The FLUXUS F601 is measurement-ready in less than 5 minutes, including the measurement of the pipe wall thickness, the connection of the transducers to the transmitter, the setup of the flow meter and finally the mounting of the transducers.

Though featuring an ergonomic design, which offers simple handling and maximum ease of use, the F601 was designed to easily withstand rough industrial environments. Besides its sturdy housing, the F601 portable flow meter features stable and precise latching transducer connectors and stainless steel armored cables to prevent damage during daily work. 

With its Li-Ion battery, the F601 allows for up to 14 hours of autonomous measurement. Matched and paired transducers as well as sophisticated algorithms correct for pipe wall echoes and wrong transducer positioning, thus ensuring reliable and highly accurate measurements - even under the most demanding application conditions. Due to the new HybridTrek mode, the portable flow meter can also reliably and accurately measure liquid flow under conditions with a high fraction of solid particles or gaseous loads.

The FLUXUS F601 portable clamp-on flow meter is also available in "Energy" and "Multifunctional" versions , allowing the measurement of  thermal energy / BTU flows and making the flow meter the ideal companion for the analysis or auditing of heating and chiller plants. The collected data can be used to perform a complete energy balance or to assist during process monitoring and optimization.

Advantages

• Ergonomic, lightweight design and simple handling - reliable results in less than 5 minutes
• Rugged for its usage in rough industrial environments - with two flow channels as standard
• Fast measurement: No zero point calibration necessary thanks to Plug & Play transducer recognition (EPROM)
• Maximum flexibility for a broad application range with only two pairs of transducers
• Bi-directional measurement for nearly all pipe materials and nearly all liquid media - huge internal database
• Ideal solution also for thermal energy / BTU metering
• Accurate and reliable measurement even under difficult flow conditions due to the new HybridTrek mode
• High degree of flexibility, e.g. for energy metering, data logging, various In-/Outputs, recording of ext. pressure data 

Applications

• Industry Solutions
  • Pharmaceutical Industries
    • Absolutely Hygienic Flow Measurements in a Pharmaceutical Plant
  • Mining
    • Flow Measurement of Sodium Hydroxide Solution in Bauxite Processing
    • Flow Measurement for Feed and Process Water Applications
  • Marine
    • Temporary Flow Measurement for Meter Verification, Leak Detection and general Inspection Tasks
• Oil & Gas
  • Onshore / Shale Oil & Gas Solutions
    • Mass Flow Measurement for Wastewater Hauling
• Chemical Industry
  • Ammonia and Fertilizer Plants
    • Flow Measurement of Diluted Ammonium Nitrate
  • Infrastructure and Feedstock Flows
    • Flow Measurement of Industrial Wastewater
    • Hydraulic balancing of a cooling tower
  • Base & Intermediate Chemicals
    • Flow Measurement of Phenol
• Industrial and Municipial Energy Management
  • Building Metering
    • Non-Intrusive Flow Measurement of Chilled Water
  • District Heating
    • Flow Measurements in a Combined Heat and Power Plant (CHP)
  • Industrial Energy Efficiency
    • Temporary Thermal Energy and Flow Measurements within Production Processes
    • Flow and Thermal Energy Measurement in Pharmaceutical Production
    • Non-invasive Pump Control and Pump Audits
    • Flow Measurement of Hot Water
• Water Industry
  • Network metering
    • Underground Pipeline Monitoring and Leak Detection
  • Potable Water Treatment
    • Non-invasive Flow Measurement Substituting a Magnetic Flowmeter
    • Flow Measurement at an Elevated Drinking Water Tank
    • Flow Measurement of Drinking Water Leading to the Network
  • Wastewater Treatment
    • Quantitative Flow Analysis in a Rural Waste Water System
    • Check Metering of Permanently Installed Flow Meters in Sewage Treatment Plants
    • Non-invasive flow measurement in sewage pumping stations

Technical Facts

Flow channels

2

Operating temperature of the transmitter

14°F ... 140°F

Degree of protection

Electronic unit

NEMA 4X / IP65 acc. to EN60529

Transport case

NEMA 6 / IP67 acc. to EN60529

Battery

Li-Ion, 7.2 V / 4.5 Ah, > 14 hours operating time

Inputs and outputs

Standard Version

Outputs: 2 x current, 2 x binary

Energy Version

Inputs: 2 x Pt 100 / Pt1000
Outputs: 2 x current, 2 x binary

Double Energy Version

Inputs: 4 x Pt 100 / Pt1000
Outputs: 2 x current, 2 x binary

Multifunctional Version

Inputs: 2 x Pt 100 / Pt1000, 2 x current
Outputs: 4 x current, 2 x binary

Media temperature

-40°F ... 750°F (High Temperature WaveInjector mounting fixture)

Pipe diameter range

1/4 inch ... 36 feet

Flow velocity range

0,03 ... 75 ft/s

Measurement accuracy
(standard)

± 1.0% of reading ± 0.03 ft/s

Measurement accuracy
(field calibrated)

± 0.5% of reading ± 0.03 ft/s

360° view

0%

1. 
2. 
3. 
4. 
5. 
6. 
7. 
8. 
9. 
10. 
11. 
12. 
13. 
14. 
15. 
16. 
17. 
18. 
19. 
20. 
21. 
22. 
23. 
24. 
25. 
26. 
27. 
28. 
29. 
30. 
31. 
32. 
33. 
34. 
35. 
36. 
37. 
38. 
39. 
40. 
41. 
42. 
43. 
44. 
45. 
46. 
47. 
48. 

For the manual 360° view pull the image left or right

Downloads

FLUXUS F601

Technical Specification

• DE
• US
• ES
• FR
• NL
• RU
• EN

FLUXUS F/G601 and F/G608 - Portable, quick and reliable

Brochure

• DE
• US
• ES
• FR
• NL
• RU
• EN