FLEXIM - FLUXUS F501 - Water & Wastewater Flowmeter - The Ideal Solution for the Water and Wastewater Industry

The Ideal Solution for the Water and Wastewater Industry

The Ideal Flowmeter for the Water and Wastewater sector

The FLUXUS F501 is FLEXIM's solution for many flow metering applications found in the water and wastewater sector and adjacent industries.

The FLUXUS F501 offers a precise bi-directional flow measurement over a wide turndown ratio - not only at high, but especially at low flow velocities. Due to its matched and paired transducers, it also guarantees a superior zero stability.

As of its high repeatability, the FLUXUS F501 also offers the possibility for leak detection. Especially at night, when temperatures are more even and only low flow velocities are common in drinking water lines, leakages can clearly be identified and such reading transferred to a process control system.

The ideal retrofit solution for water pipes

As a non-invasive clamp on flow meter, the FLUXUS F501 is the ideal solution for retrofitting in existing networks. As there is no need for interruption of supply lines and costly shaft constructions, it is thus also the much more cost effective solution in comparison to conventional metering technologies such as magnetive inductive meters.
Due to the non-invasive technology, no cutting or welding work is needed to mount the transducers on the pipe. During installation, the flow meter's user interface is automatically adapted to the connected transducers and no zeroing is necessary. Water is already pre-selected as medium and it's physical properties are stored in the flowmeter's memory.

In most cases only the pipe's outer diameter and wall thickness as well as the water temperature has to be entered in order to start the measurement. The commissioning work is thus reduced to a minimum. On request, the instrument can even be pre-configured at the factory.

The Ideal Solution for the Water and Wastewater Industry - FLUXUS F501

Advantages

  • Precise bi-directional, highly dynamic flow measurement
  • Water-tight transducers (IP67) for outside use
  • Virtually maintenance free - permanent coupling pads instead of frequent regreasing
  • Simple retrofitting in existing networks and systems - no need for pipe work
  • User-friendly menu navigation - the firmware is specifically adapted to the needs of the water industry
  • For nominal pipe diameters of 0.4 inches up to 7.5 feet - highly cost effective
  • Superior pipeline leak detection - high repeatability of accurate measurement readings
  • Digital Signal Processing ensuring stable and reliable results even under difficult measurement conditions
  • High measuring accuracy, even at low flow velocities due to matched transducers

Technical Facts

Flow channels
1
Operating temperature of the transmitter
14°F ... 140°F
Degree of protection
Transmitter: IP66 / Transducer: IP67 (NEMA 6)
Outputs
1x (2x) current, 2x binary
Media temperature
-40°F ... 210°F
Pipe diameter range
0.4 inch ... 7.5 feet
Flow velocity range
0.03 ... 75 ft/s
Measurement accuracy
± 2 % of reading, ±0.03 ft/s
Repeatability
± 0,25% of reading, ±0.03 ft/s
Additional Notes
Available as 240V or 24V (DC) power supply version

360° view

0%

For the manual 360° view pull the image left or right

Downloads

FLUXUS F501 - Maintenance-free Ultrasonic Flow Meter for Water

Brochure

Water and Wastewater Solutions

Brochure

FLUXUS F501

Technical Specification

FLUXUS F501IP

Technical Specification
Scroll to top