360° View

Overview

The ultrasonic flow meter for operation in hazardous areas

The FLUXUS F809 is FLEXIM's dual channel ultrasonic clamp-on flow meter for bi-directional flow measurement of liquids in hazardous areas (ATEX, IECEx Zone 1 and FM Class I, Div. 1 approved).

With its flameproof housing and the corrosion resistant transducers residing outside the pipe wall, but inside the rugged VARIOFIX C mounting fixture, ensuring a permanent contact pressure and high mechanical stability, the FLUXUS F809 series is perfectly suited for every demanding industrial application. The connection and electronics compartments of the FLUXUS F809 are hermetically sealed, so that the measurement system provides maximum operational reliability and safety.

Not only is the FLUXUS F809 rugged and reliable, but it is also precise. Thanks to carefully matched and temperature compensated transducers (fully ANSI / ASME MFC 5M compliant), the FLUXUS F809 offers an unmatched zero-point stability and precise bi-directional flow measurement of virtually any liquid media - ranging from crude oil to refined products and chemical media - over a practically unlimited turndown range.

The FLUXUS F809 flow meter can be applied on inner pipe diameters ranging from 0.25 inch up to 500 inches (no limitations on pipe wall thickness or material) and media temperatures from -275 °F up to 1166 °F (by use of the high temperature mounting fixture WaveInjector).

With up to two measurement channels, the FLUXUS F809 flow meter is also ideal for difficult measurement points with non-ideal flow profiles. Even liquid streams with high solids content or gas bubbles are not a problem due to the innovative HybridTrek mode and the unique signal processing implemented into the flow computer.

Advantages

  • Bi-directional flow measurement of liquids and gases in FM Class I, Div. 1 and ATEX / IECEx Zone 1 areas
  • Very cost effective: No pipe work, No process shut-down, Virtually maintenance-free
  • Matched, paired and wet calibrated flow transducers (traceable certification to national standards)
  • Excellent zero-point stability and drift-free
  • Wide turndown ratio
  • Independent of pipe size, material, operating pressure, medium and temperature (from as low as -275 °F up to +1166 °F)
  • High tolerance to entrained solids and gases
  • Free of wear and tear and abrasion
  • Not prone to clogging or corrosion
  • No pressure loss or risk of potential leaks and fugitive emissions

Downloads

Technical facts

Measurement uncertainty of the measuring system (volumetric flow rate)
± 1 % of reading ±0.02 ft/s
Measurement uncertainty at the measuring point (volumetric flow rate)
--
Repeatability
0.15 % of reading ±0.02 ft/s
Flow velocity range
0.03 to 82 ft/s
Ex zone transmitter
ATEX/IECEx Zone 1
FM Class I - Div1
Power supply
100-230VAC, 24DC
Available transducer
Shear Wave
for Ex zones
ATEX/IECEx Zone 1
FM Class I - Div1
for pipe sizes range
0.39 inch to 255.9 inch
for temperature range
-40°F to +392°F / WI: -328°F to +1166°F
Outputs
4-20mA active/passive
4-20mA HART active/passive
4-20mA passive intrinsic safety
pulse/frequency/binary
Digital communication
Modbus RTU
Additional Information
For more detailed Information please download the Technical Specifications