The Ideal Flow Meter for the Water and Wastewater Sector
The FLUXUS F501 clamp-on ultrasonic flow meter for water is FLEXIM’s solution for many metering applications found in the water and wastewater sector and adjacent industries.
The FLUXUS F501 ultrasonic water flow meter offers a precise bi-directional flow measurement over a wide turndown ratio - not only at high, but especially at low flow velocities. Due to its matched and paired transducers, it also guarantees a superior zero stability.
As of its high repeatability, the FLUXUS F501 wastewater flow meter also offers the possibility for leak detection. Especially at night, when temperatures are more even and only low flow velocities are common in drinking water lines, leakages can clearly be identified and such reading transferred to a process control system.
The ideal retrofit solution for water pipes
As a non-invasive clamp-on flow meter for water, the FLUXUS F501 is the ideal solution for retrofitting in existing networks. As there is no need for interruption of supply lines and costly shaft constructions, it is thus also the much more cost-effective solution in comparison to conventional metering technologies such as magnetive inductive meters.
Due to the non-invasive technology in this non-contact water flow meter, no cutting or welding work is needed to mount the transducers on the pipe. During installation, the wastewater flow meter’s user interface is automatically adapted to the connected transducers and no zeroing is necessary. Water is already pre-selected as medium and its physical properties are stored in the flow meter’s memory.
In most cases only the pipe’s outer diameter and wall thickness as well as the water temperature has to be entered in order to start the measurement. The commissioning work is thus reduced to a minimum. On request, the instrument can even be pre-configured at the factory.
- Precise bi-directional, highly dynamic flow measurement
- Water-tight transducers (IP67) for outside use
- Virtually maintenance free - permanent coupling pads instead of frequent regreasing
- Simple retrofitting in existing networks and systems - no need for pipe work
- User-friendly menu navigation - the firmware is specifically adapted to the needs of the water industry
- For nominal pipe diameters of 0.4 inches up to 7.5 feet - highly cost effective
- Superior pipeline leak detection - high repeatability of accurate measurement readings
- Digital Signal Processing ensuring stable and reliable results even under difficult measurement conditions
- High measuring accuracy, even at low flow velocities due to matched transducers