FLEXIM - FLUXUS F401 - Heavy duty portable ultrasonic water flow meter - Heavy duty portable ultrasonic water flow meter

Heavy duty portable ultrasonic water flow meter

The FLUXUS F401 is the ideal flow meter for long-term measurement campaigns in the field. Depending on the programmed measurement interval the FLUXUS F401 can operate autonomously for several months. This makes it suitable for leak detection campaigns and hydraulic studies, where regular measurements are needed over a longer period of time.

The clamp-on ultrasonic system has been designed especially to meet the needs of the water and wastewater industries. The FLUXUS F401 is installed without process interruption and the installation can be completed within a few minutes. Thereafter, it delivers accurate and highly repeatable measurements that are not affected by drift. Due to its excellent low flow capability (down to 0.01 m/s), the FLUXUS F401 is ideally suited for monitoring drinking water networks, in which low flow velocities are common. The strong signal output and the noise suppression technology make it possible to use the FLUXUS F401 on very large pipes and challenging materials: Old and rusty steel, badly manufactured GRP or even armored concrete pipes (independent of lining and build-up inside the pipe) are not a metering challenge to the FLUXUS F401.

All parts of the FLUXUS F401 have been designed to ensure utmost robustness for regular heavy duty use in rough conditions. The metal sheathing of the transducer cable ends protects them against strong bending or cuts and ensures tangle-free operation. The six meter cable length of the IP68 transducers allows for the installation of the transducers even in deep manholes, whereby the transmitter can be placed in the upper part of the manhole. The transmitter is housed in a robust case and has IP67 protection.

All this makes the FLUXUS F401 the ideal companion for the daily work of water suppliers, hydrologists and engineering offices.

Heavy duty portable ultrasonic water flow meter - FLUXUS F401 - Water & Sewage Flowmeter

Vantagens

  • Several months battery-powered operation time
  • Extremely robust design
  • Ideal for long field campaigns
  • Metal cable sheathing
  • Permanent coupling pads
  • IP68 transducers

Características Técnicas

Temperatura de operação do transmissor
-10 °C ... 50 °C
Temperatura de funcionamento de transdutores na parede de tubo
-40 °C ... 100 °C
Grau de proteção transmissor
IP67
Grau de proteção transdutor
IP68
Saídas
1x Current, 1x Binary
Interface de comunicação
RS232 / USB (with adapter)
Faixa de diâmetro da tubulação
40 mm ... 3 m
Fluxo faixa de velocidade
0,01 ... 25 m/s
A precisão da medição
±2.0 % of reading ±0,01 m/s
Repetibilidade
0.25 % of reading ±0,01 m/s
Médio
water with <6% gaseous or solid content by volume

360° view

0%

Para a visualização manual em 360 °, puxe a imagem para a esquerda ou para a direita

Downloads

FLUXUS F401 - Heavy duty portable ultrasonic water flow meter

Brochura

Non-invasive water and wastewater flow measurement

Brochura

FLUXUS F401

Especificação técnica

Power Pack PP026NN

Especificação técnica
Scroll to top