FLEXIM - FLUXUS F401 - Heavy duty portable ultrasonic water flow meter - Heavy duty portable ultrasonic water flow meter

Heavy duty portable ultrasonic water flow meter

The FLUXUS F401 is the ideal flow meter for long-term measurement campaigns in the field. Depending on the programmed measurement interval the FLUXUS F401 can operate autonomously for several months. This makes it suitable for leak detection campaigns and hydraulic studies, where regular measurements are needed over a longer period of time.

The clamp-on ultrasonic system has been designed especially to meet the needs of the water and wastewater industries. The FLUXUS F401 is installed without process interruption and the installation can be completed within a few minutes. Thereafter, it delivers accurate and highly repeatable measurements that are not affected by drift. Due to its excellent low flow capability (down to 0.01 m/s), the FLUXUS F401 is ideally suited for monitoring drinking water networks, in which low flow velocities are common. The strong signal output and the noise suppression technology make it possible to use the FLUXUS F401 on very large pipes and challenging materials: Old and rusty steel, badly manufactured GRP or even armored concrete pipes (independent of lining and build-up inside the pipe) are not a metering challenge to the FLUXUS F401.

All parts of the FLUXUS F401 have been designed to ensure utmost robustness for regular heavy duty use in rough conditions. The metal sheathing of the transducer cable ends protects them against strong bending or cuts and ensures tangle-free operation. The six meter cable length of the IP68 transducers allows for the installation of the transducers even in deep manholes, whereby the transmitter can be placed in the upper part of the manhole. The transmitter is housed in a robust case and has IP67 protection.

All this makes the FLUXUS F401 the ideal companion for the daily work of water suppliers, hydrologists and engineering offices.

Heavy duty portable ultrasonic water flow meter - FLUXUS F401 - Water & Sewage Flowmeter

ventajas

  • Several months battery-powered operation time
  • Extremely robust design
  • Ideal for long field campaigns
  • Metal cable sheathing
  • Permanent coupling pads
  • IP68 transducers

Aplicaciones

    Hechos técnicas

    Temperatura de funcionamiento del transmisor
    -10 °C ... 50 °C
    Temperatura de funcionamiento de los transductores en la pared del tubo
    -40 °C ... 100 °C
    Grado de protección transmisor
    IP67
    Grado de protección transductor
    IP68
    Salidas
    1x Current, 1x Binary
    interfaz de comunicación
    RS232 / USB (with adapter)
    Alcance del diámetro de la tubería
    40 mm ... 3 m
    Alcance de volocidad de flujo
    0,01 ... 25 m/s
    Precisión de medición
    ±2.0 % of reading ±0,01 m/s
    Repetibilidad
    0.25 % of reading ±0,01 m/s
    Medio
    water with <6% gaseous or solid content by volume

    360° view

    0%

    Para la vista manual de 360 °, tire de la imagen hacia la izquierda o hacia la derecha.

    Descargas

    FLUXUS F401 - Heavy duty portable ultrasonic water flow meter

    Folleto

    Non-invasive water and wastewater flow measurement

    Folleto

    FLUXUS F401

    Especificación técnica

    Power Pack PP026NN

    Especificación técnica
    Scroll to top