Demonstration measurement at your site

Assure yourself of the advantages and superior performance of our non-invasive metering technology with a non-committal demonstration at your site. There are no prerequisites and the demonstration with one of our portable solutions will only take a few minutes of your time.

A brief description of your application would be helpful for us. Additional comments and a preferred date and time for the demonstration are always welcome:

FLEXIM - FLUXUS XLF - Xtra Low Flow Meter - Non-invasive Flow Meter for Extremely Low Flow rates

FLUXUS XLF - Low Flow Meter

FLUXUS XLF - Low Flow Meter

Non-invasive Flow Meter for Extremely Low Flow rates

Flow channels
1
Operating temperature of the transmitter
-40 °C ... +60 °C
Degree of protection
IP66
Functional Safety (acc. to IEC / DIN EN 61508)
SIL2
Optional hazardous area classification
ATEX / IECEx Zone 1 and 2, FM Class I, Div. 1 / 2
Outputs
A variety of combinations are available from the following: current (0/4 mA ... 20 mA), voltage, frequency, pulse, alarm
Inputs
Maximum 4, Available are: Temperature (PT 100 4-wire), current, voltage
Communication Protocol
HART or Foundation Fieldbus or ModBus RTU or RS485 or BACNet MS/TP
Media temperature
-40 °C ... +200 °C
Pipe diameter range
10 mm ... 50 mm (independent of material and wall thickness)
Flow velocity range
> 0,003 m/sec (at stable media temperatures flows as low as 0,001 m/sec can accurately be monitored)
Calibrated accuracy
± 1,2% of reading, ± 0,01 / (N x ID) [m/s] N = number of soundpaths, ID = inner diameter in [inch]