Demonstration measurement at your site

Assure yourself of the advantages and superior performance of our non-invasive metering technology with a non-committal demonstration at your site. There are no prerequisites and the demonstration with one of our portable solutions will only take a few minutes of your time.

A brief description of your application would be helpful for us. Additional comments and a preferred date and time for the demonstration are always welcome:

FLEXIM - FLUXUS F809 - Hazardous Area Flowmeter - Permanent Flow Meter for Hazardous Areas

Permanent Flow Meter for Hazardous Areas

The ultrasonic flow meter for operation in hazardous areas

The FLUXUS F809 is FLEXIM's dual channel ultrasonic clamp-on flow meter for bi-directional flow measurement of liquids in hazardous areas ( ATEX, IECEx Zone 1 and FM Class I, Div. 1 approved).

With its flameproof housing and the corrosion resistant transducers residing outside the pipe wall, but inside the rugged VARIOFIX C mounting fixture, ensuring a permanent contact pressure and high mechanical stability, the FLUXUS F809 series is perfectly suited for every demanding industrial application. The connection and electronic compartment of the FLUXUS F809 is hermetically sealed, so that the measurement system provides maximum operational reliability and safety.

Not only is the FLUXUS F809 rugged and reliable, it is precise. Thanks to carefully matched and temperature compensated transducers (fully ANSI / ASME MFC 5M compliant), the FLUXUS F809 offers an unmatched zero point stability and precise bi-directional flow measurement of virtually any liquid media - ranging from crude oil to refined products and chemical media - over an unlimited turndown range.

The FLUXUS F809 flow meter can be applied at inner pipe diameters ranging from 6 mm up to 12000mm (no limitations on pipe wall thickness or material) and media temperatures from -190°C up to +600°C (by usage of the high temperature mounting fixture WaveInjector).

With up to two measurement channels, the FLUXUS F809 flow meter can also be applied to difficult measurement points with non-ideal flow profiles. Even liquid streams with a high content of solids or gas bubbles are not a problem due to the innovative HybridTrek mode and the unique signal processing implemented into the flow computer.

Permanent Flow Meter for Hazardous Areas - FLUXUS F809


  • Bi-directional flow measurement of liquids and gases in FM Class I, Div. 1 and ATEX / IECEx Zone 1 areas
  • Very cost effective: No pipe works, No process shut-downs, Virtually maintenance-free
  • Matched, paired and wet calibrated flow transducers (traceable certification to national standards)
  • Excellent zero point stability and drift-free
  • Wide turndown ratio
  • Independent of pipe size, material, operating pressure, medium and temperature (from as low as -170 °C up to +600 °C)
  • High tolerance to entrained solids and gases
  • Free of wear, tear and abrasion
  • Not prone to clogging or corrosion
  • No pressure loss or source of potential leaks and fugitive emissions

Technical Facts

Operating temperature of the transmitter
-30°C ... +60°C
Degree of protection
IP66 (Transmitter) Coating for Offshore usage
Quantities of measurement
volumetric flow rate, mass flow rate, flow velocity
Optional hazardous area classification
ATEX, IECEx Zone 1, FM Class I, Div. 1
4 (various combinations of current, binary, Modbus and HART are available)
Communication Protocol
HART, Modbus
Media temperature
-40°C ... +200°C ( -190°C ... +600°C with high temperature WaveInjector mounting fixture)
Pipe diameter range
6 mm ... 12000 mm
Flow velocity range
0,01 ... 25 m/s
Measurement accuracy
(field calibrated)
±0.5 % of reading ±0.01 m/s
Measurement accuracy
±1.2 % of reading ±0.01 m/s
0.15% of reading ± 0.01 m/s
Additional Notes
240V or 24V DC power supply version of the transmitter available

360° view


For the manual 360° view pull the image left or right



Technical Specification

FLUXUS F/G80X - For Operation in Hazardous Areas

Scroll to top