Demonstration measurement at your site

Assure yourself of the advantages and superior performance of our non-invasive metering technology with a non-committal demonstration at your site. There are no prerequisites and the demonstration with one of our portable solutions will only take a few minutes of your time.

A brief description of your application would be helpful for us. Additional comments and a preferred date and time for the demonstration are always welcome:

Description

Description

FLEXIM's GST 6108(M) ultrasonic leakage meter checks and monitors the functionality and internal leak rate of the green, yellow and blue hydraulic systems for the complete, LeftHand Wing, Right-Hand Wing and Tail sections of the below mentioned Airbus aircraft models.

This portable instrument is rapidly installed thanks to the non-invasive measurement with ultrasound. The transducer is simply clamped onto the hydraulics line and connected to the unit. After selection of the aircraft type and measuring point designation, the test results (pass/fail) are displayed.

The hydraulics leakage meter is used for:

Maintenance Task: AMM / ATA chapter 29, Heavy Maintenance
Model of Aircraft: Airbus A320 & A320neo family, Post Mod 36625
(A318, A319 CJ, A319-100, A320-100, A320-200, A321-100, A321-200)

Airbus A330/340 family, Post Mod 58345
(all)
Airbus A350 family
(A350-900, A350-1000 when entering service)
Airbus A380
(A380-800)

Airbus Approval: Ground Support Equipment
Certificate of Acceptance
Certificate No.: D29017
Certificate No.: D29031

Part Numbers:

P/N 610007AB Ultrasonic LEAKAGE Meter GST 6108
P/N 610007010-01 Firmware for A320 Family
P/N 610007030-01 Firmware for A330/340 Family
   
   
P/N 610080 / 81 Training course on site / in Berlin
P/N 610090 Calibration and adjustment of a LEAKAGE transducer with a GST 6108

 

Download

Technical Specification GST 6108

PDF | 1.4MB

Technical Specification GST 6108M

PDF | 1.4MB

Ground Instruction Manual GST 6108

PDF | 1.4MB

Ground Instruction Manual GST 6108M

PDF | 1.4MB