The WaveInjector - simple to install, reliable performance 

The WaveInjector, along with its ultrasonic transducers, is simply clamped onto the outer surface of the pipe, using coupling plates for a proper acoustic contact.

This means, that there is no need to open the pipe - no drilling, and no process shut-down is required.

Once installed, the transducers do not suffer wear and tear from the process fluid, and they create no pressure drop.

The FM, CSA and ATEX-certified transducers and transmitters are a safeguard in potentially explosive atmospheres.

FLEXIM offers a wide range of ultrasonic transducers and transmitters to match any flow measurement application. The exceptionally high dynamic range of FLEXIM's ultrasonic technology - from flow velocities as low as 0.03 ft/s and up to 100 ft/s - outperforms most other flowmeter types, offering big advantages when you need to measure widely varying flow rates accurately.

Unique measuring technology

FLEXIM is the only worldwide manufacturer of high-temperature, non-intrusive ultrasonic flow meters.

Especially the WaveInjector® is used all over the world, by some of the biggest names in the petrochemical and process industries.

The reason is clear: from crude oil to coal tar distillates. The WaveInjector® remains accurate and reliable under the toughest conditions.

Advantages using FLEXIM's patented WaveInjector:

• Trouble-free operation at high temperatures of up to 750°F
• Installation without process interruption
• Accurate and repeatable, even at low flows
• Wide dynamic measurement range
• No clogging, even with dirty or fouling fluids as there are no parts protruding the pipe
• Creates no pressure loss and there are no pressure ports
• Nearly no maintenance efforts are required
• No risk of leaks
• Fits all standard pipe sizes from DN 40 upwards
• Hazardous Area Certification
• Independent of medium and pressure
• Inherently bi-directional

Your Benefits:

• Improved plant efficiency
• Decreased start-up, operating and maintenance costs
• Increased profits due to tighter process control
• Decreased inventory costs for flowmeters and spare parts
• Increased operator and plant safety
• Increased environmental compliance
• Easier plant start-ups and upgrades
• Increased application flexibility