No More HOT Work Permits!
Thus, users are not anymore obliged to obtain a Hot Work Permit, making the access to hazardous areas much easier and less time consuming.
Offering a high degree of flexibility, without compromising on Safety!
The extremely resistant carbon fibre housing, together with the rugged transducer design, ensures a high impact protection as well as resistance against oil, water and many other liquids. The F608 shares the same efficient battery management as the F601, offering over 14 hrs. of remote measurement time.
Moreover, the measurement system can be fully set-up in less than five minutes due to the intuitive user guidance and the automatic transducer recognition. Its application range is unrivalled - from pipes as small as 0.4 up to 255 inches inner diameter and temperatures ranging from -40°F to 392°F (with the WaveInjector solution even from -256°F to 840°F).
The F608 goes where other portable devices can't
Being equipped with two flow channels, multiple In- and Outputs and an integrated data logger with a serial interface, the flowmeter is designed for direct usage in demanding environments, such as in the Upstream, Midstream and Downstream area as well as in the processing industries and the energy sector.
As known from all FLEXIM flow meters, also the F608 features a highly precise bi-directional measurement at fast and even very slow flow rates over a wide dynamic measurement range and is not prone to temperature and zero drift, being fully compliant to ANSI/ASME regulations.
However, the F608 is not only safe, accurate and reliable, but also very compact and lightweight, offering the user to even carry the complete measuring system as personal luggage for Offshore visits.
Unrivalled in every aspect:
- High impact Carbon Fiber housing
- Rugged transducer design
- FM Class I, Div. II approved
- Compact and very lightweight
Instantly in Service
- Direct access to hazardous areas
- Fast and easy set-up (less than 5 minutes)
- Automatic transducer recognition
- Intuitive user guidance
- Unrivalled application range
- Superior accuracy even with media containing solids and gases due to the HybridTrek-Mode
- Integrated high capacity Li-Ion battery (>14 hrs. of remote measuring)
Accurate and Reliable
- All transducers are wet calibrated
- High precision during high and low flow rates
- No temperature and zero drift
Upstream (On- and Offshore)
Midstream and Downstream (Pipelines and Refineries)
Energy Sector (e.g. HVAC, geothermal, power plants)
|FLUXUS® F608: The Portable Flow Meter for Hazardous Areas|
|Operating temperature of the transmitter||14°F to 140°F|
|Degree of protection||NEMA 4 / IP65 acc. to EN60529|
|Explosion protection||FM Class I, Div. II|
±1.6% of reading, ±0.03 ft/s (standard)
±1.2% of reading, ±0.03 ft/s (extended)
±0.5% of reading, ±0.03 ft/s (field calibrated)
|Battery||Li-Ion, 7.2 V/4.5 Ah, > 14 hours operating time|
|Weight of Transmitter||4.2 lb|
|Inputs and Outputs|
|Standard Version||Outputs: 2 x current, 2 x binary|
Inputs: 2 x Pt 100/Pt1000
Outputs: 2 x current, 2 x binary
|Media temperature||-40°F ... 392°F (-256°F ... 840°F with High Temperature WaveInjector mounting fixture)|
|Pipe diameter range||1/4 inch ... 35 feet|
|Flow velocity range||0.03 ... 75 ft/s|