English (US)
English
简体中文
Deutsch
Français
Español
Nederlands
Português
Русский
Unmatched in Performance
The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters.
The FLUXUS F601 is measurement ready in less than 5 minutes, including the measurement of the pipe wall thickness, the connection of the transducers to the transmitter, the parametrisation of the flow meter and finally the mounting of the transducers.
Though featuring an ergonomic design, which offers simple handling and maximum ease of use, the F601 was designed to easily withstand rough industrial environments. Besides its sturdy housing, the F601 portable flow meter features stable and precise push-pull transducer connectors with the cables themselves being steel armored to prevent breaking or rupturing during daily work.
With its Li-Ion battery, the F601 allows for up to 14 hours of autonomous measurement. Matched and paired transducers as well as sophisticated algorithms care for the correction of pipe wall echoes and a wrong transducer positioning, thus ensuring reliable and highly accurate measurements - even during the most demanding application conditions. Due to the new HybridTrek mode, the portable flow meter can also reliably and accurately measure the liquid flow under conditions with a high content of solid particles or gaseous loads.
The FLUXUS F601 portable clamp-on flow meter is also available in an "Energy" and "Multifunctional" version , allowing the measurement of thermal energy / BTU flows and making the flow meter the ideal companion for the analysis or auditing of heating and chiller plants. The collected data can be used to perform a complete energy balance or to assist during process monitoring and optimization.
Fast, rugged, accurate - the benefits are evident...
-
Ergonomic, lightweight design and simple handling - reliable results in less than 5 minutes
-
Rugged for its usage in rough industrial environments - with two flow channels as standard
-
Fast measurement: No zero point calibration necessary thanks to Plug & Play transducer recognition (EPROM)
-
Maximum flexibility for a broad application range with only two pairs of transducers
-
Bi-directional measurement for nearly all pipe material and nearly all liquid media - huge internal database
-
Ideal solution also for thermal energy / BTU metering
-
Accurate and reliable measurement even under difficult flow conditions due to the new HybridTrek mode
-
High degree of flexibility, e.g. for energy metering, data logging, various In-/Outputs, recording of ext. pressure data
Applications:
General
- Service and maintenance
- Replacement of defective devices
- Support of commissioning process and installation
- Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves
- Energy efficiency
- audits
Chemical Industry
- Portable flow controls at start-up and/or inspection of facilities
- Helpful tool for facility optimization
- Flow measurement of heat transfer media
Water supply / Wastewater services
- Leakage control
- Treatment dosage
- Flow control in water supply networks
Refrigeration and air conditioning systems
- Measurement of inlet and outlet flow for service work and maintenance
- Pump preventative maintenance and checks
- Optimization of energy efficiency
- Detection of fouling processes in heat exchangers
Facility management / Energy Metering - BTU
- Optimization of heating and air conditioning systems in large building complexes
- Pump control
Food and Beverage Industry
- CIP and SIP optimization
- Consumption optimization
Aeronautical industry
Technical Facts
| FLUXUS® F601: The Portable Multifunctional Flow Meter | |
|---|---|
| Flow channels | 2 |
| Operating temperature of the transmitter | 14°F ... 140°F |
| Degree of protection | |
| Electronic unit | NEMA 4X / IP65 acc. to EN60529 |
| Transport case | NEMA 6 / IP67 acc. to EN60529 |
| Battery | Li-Ion, 7.2 V / 4.5 Ah, > 14 hours operating time |
| Inputs and outputs | |
| Standard Version | Outputs: 2 x current, 2 x binary |
| Energy Version |
Inputs: 2 x Pt 100 / Pt1000 Outputs: 2 x current, 2 x binary |
| Double Energy Version |
Inputs: 4 x Pt 100 / Pt1000 Outputs: 2 x current, 2 x binary |
| Multifunctional Version |
Inputs: 2 x Pt 100 / Pt1000, 2 x current Outputs: 4 x current, 2 x binary |
| Media temperature | -40°F ... 750°F (High Temperature WaveInjector mounting fixture) |
| Pipe diameter range | 1/4 inch ... 36 feet |
| Flow velocity range | 0,03 ... 75 ft/s |
|
Measurement accuracy |
±1.6 % of reading ±0.03 ft/s (standard) ±1.2 % of reading ±0.03 ft/s (extended calibration) ±0.5 % of reading ±0.03 ft/s (field calibrated) |
Downloads
