FLUXUS® ADM 7407 is an ultrasonic flowmeter for permanent installation. Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are thus quickly installed, without process interruption and without production stop.

Since the flowmeters' transducers are not in contact with the medium to be measured, they are not submitted to wear and tear. The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. The flowmeter is ideal for chemically agressive media.

Thanks to its exceptional dual-uP technology, high number of measuring cycles per second and adaptive signal processing, FLUXUS® ADM 8X27 produces stable and reliable measuring results even under difficult conditions.

No zeroing procedure is necessary at the commissioning since all transducer pairs are factory calibrated and the calibration data is permanently stored in the transducers themselves.

An extended status display helps the user to judge the measuring situation and current measuring precision directly during the measurement.

FLUXUS ADM 7407 is delivered with with one or two flow measurement channels. Additionally, it can be equipped with various outputs and up to 4 process inputs. The input quantities (e.g. temperature or pressure) can be used by the flowmeter together with the measured flow for the calculation of further quantities: energy, mass flow, etc.

Back to overview