- Start
- Beurzen en conferenties
- Ultrasone flowmeters
- Toonaangevende flowtechnologie
- Uw voordelen
- Flowmeters voor vloeistoffen
- De draagbare flowmeter - FLUXUS F601
- Draagbare flowmeting voor gevaarlijke gebieden - FLUXUS F608
- Water - flowmeter voor permanente installatie FLUXUS ADM 5107
- De rack-flowmeter voor vloeistoffen - FLUXUS ADM 7907
- Flowmeter voor permanente installatie voor alle media - FLUXUS ADM 7407
- De ultrasone flowmeter voor permanente installatie voor gevaarlijke gebieden - FLUXUS ADM 8027
- De offshore-flowmeter voor permanente installatie - FLUXUS ADM 8127
- Flowmeters voor gassen
- De mobiele gasflowmeter - FLUXUS G601
- Mobiele flowmeting van perslucht - FLUXUS G601 CA Energy
- Draagbare gasflowmeter voor gevaarlijke gebieden - FLUXUS G608
- De stationaire gasflowmeter - FLUXUS G704
- De rack-flowmeter - FLUXUS G709
- De explosieveilige expert - FLUXUS G800
- De offshore-gasflowmeter - FLUXUS G801
- BTU - Energiemeting
- Procesanalysatoren
- FLEXIM Oil & Gas
- Refinery
- State-of-the-Art
- Advantages & Benefits
- Field-Proven Worldwide
- Heavy Crude Oil flow measurement
- Overflash Mass Flow Measurement at 380°C
- Heat Transfer Oil at High Temperatures
- Heavy Gasoil in Vacuum Destillation Tower
- Fluidized Catalytic Cracker
- Highly Viscous Coker and Visbreaker Feed
- Portable Measurement of Different Media
- Bitumen at Oil Sand Facility
- Measurement of Bitumen at 370°C
- Hot Pitch During the Distillation of Coal Tar
- Underground Gas Storage
- Upstream / Offshore
- Refinery
- Service & Documents
- Contact
Leading flow measurement Technology
The FLEXIM transit-time difference method exploits the fact that the transmission speed of an ultrasonic signal depends on the flow velocity of the carrier medium.
An ultrasonic signal moves slower against the flow direction of the medium than when with the flow direction. For the measurement, ultrasonic pulses are sent through the medium in both directions. The transit-time difference is measured and allows an accurate determination of the volume flow.
Approved Innovation
The FLUXUS® range of ultrasonic clamp-on flow meters are the most advanced in the world.
They are available with a range of certification options from ATEX zones 1 and 2, FM Class I Div II, IECEx, IP66/67/68 and are capable of withstanding pipe temperatures in excess of 400°C. FLEXIM´s Oil & Gas Division provides a comprehensive service and full support over the full product range wherever it is located.
