English (US)
English
简体中文
Deutsch
Français
Español
Nederlands
Português
Русский
- FLUXUS G608 - Portable Flowmeter for Gases in hazardous areas
- Advantages
- Applications
- Technical Facts
No More HOT Work Permits!
The new FLUXUS G608 portable gas flow meter is based on the widely used, highly reliable and versatile G601, but has been specifically engineered for its use within hazardous areas and is covered by ATEX certification.
It is the ideal solution for gas flow measurement in potentially explosive areas, may it be for a temporary replacement of a stationary flow meter, check metering or service operations. Due to its certification, users are not anymore obliged to obtain a Hot Work Permit, making the access to ATEX Zones much easier and less time consuming.
Offering a high degree of flexibility, without compromising on Safety!
The extremely resistant carbon fiber housing, together with the rugged transducer design, ensures a high impact protection as well as resistance against oil, water and many other liquids. The G608 portable gas flow meter shares the same efficient battery management as the G601, offering over 14 hrs. of remote measurement time.
Moreover, the measurement system can be fully set-up in less than five minutes due to the intuitive user guidance and the automatic transducer recognition. Its application range is unrivaled - from pipes as small as 7mm up to 1600mm inner diameter and temperatures ranging from -40°C to 200°C.
The G608 gas flow meter goes where other portable devices can't
Being equipped with two flow channels, multiple Inputs and an integrated data logger with a serial interface, the portable gas flow meter is designed for direct usage in demanding environments, such as in the Upstream, Midstream and Downstream area as well as in the processing industries and the energy sector.
As known from all FLEXIM flow meters, also the G608 features a highly precise bi-directional measurement at fast and even very slow gas flow rates over a wide dynamic measurement and pressure range and is not prone to temperature and zero drift, being fully compliant to ANSI/ASME regulations.
However, the G608 is not only safe, accurate and reliable, but also very compact and lightweight, offering the user to even carry the complete measuring system as personal luggage for Offshore visits.
Unrivaled in every aspect:
Extremely resistant
- High impact Carbon Fiber housing
- Rugged transducer design
- Designed for ATEX Zones, IP65
- Compact and very lightweight
Instantly in Service
- Direct access to hazardous areas
- Fast and easy set-up (less than 5 minutes)
- Automatic transducer recognition
- Intuitive user guidance
Highly Versatile
- Unrivaled application range
- Superior accuracy even with media containing solids
- Integrated high capacity Li-Ion battery (>14 hrs. of remote measuring)
Accurate and Reliable
- All transducers are wet calibrated
- High precision during high and low flow rates
- No temperature and zero drift
Applications:
-
Upstream (On- and Offshore)
-
Midstream and Downstream
-
Gas Storage and Transport
-
Chemical Industry
-
Energy Sector (e.g. HVAC, geothermal, power plants)
Technical facts
| FLUXUS® G608: The Portable Gas Flow Meter for Hazardous Areas | |
|---|---|
| Flow channels | 2 |
| Operating temperature of the transmitter | -10°C to +60°C |
| Degree of protection (acc. to EN60529) | IP65 |
| Explosion protection | ATEX Zone 2, Transducers: ATEX Zone 1 and 2 |
| Accuracy |
+/- 1 ... 3% of reading +/- 0.01 m/s depending on the application +/- 0.5% of reading +/- 0.01 m/s field calibrated |
| Battery | Li-Ion, 7.2 V/4.5 Ah, > 14 hours operating time |
| Weight of Transmitter | 1.9 kg |
| Outputs (no Inputs) | 2 x current, 2 x binary |
| Calculation of the standard volume flow based on AGA-8 / ISO 12213-1 | Yes |
| Media temperature | -40°C ... 200°C |
| Pipe diameter range | 7mm ... 1600mm |
| Operating pressure range | no limitation |
| Flow velocity range | 0,01 ... 35 m/s (dependent on pipe size) |
Downloads
