Portable flow measurement of gases without compromises
The FLUXUS G601 portable gas flow meter measures the flow of nearly any gas using FLEXIM's proven transit-time correlation technique.
Special ultrasonic Lamb and shear wave transducers are simply clamped onto the outside of the pipe, thus no cutting into the pipe or process interruption is required for installation.
The FLUXUS G601 portable gas flow meter allows for an inherently bi-directional gas flow measurement of operational and standard volume flows. As the transducers are mounted on the outside of the pipe wall, the system does not suffer from wear and tear or clogging, can't be a risk for leaks and will not cause any pressure drops inside the pipe. It is the ideal tool for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed gas flow meters.
Though featuring an ergonomic design, which offers simple handling and maximum ease of use, the G601 was designed to easily withstand rough industrial environments. Besides its sturdy housing, the G601 portable gas flow meter features stable and precise push-pull transducer connectors with the cables themselves being steel armored to prevent breaking or rupturing during daily work.
The FLUXUS® G601 gas flow meter offers maximum flexibility
With its Li-Ion battery, the G601 allows for up to 14 hours of autonomous measurement. Due to its matched and paired transducers as well as the internal temperature compensation (compliant to ANSI/ASME) the measurement system is drift free and zero stable ensuring accurate readings. Moreover, as the transducer calibration data is automatically loaded by connecting the transducer to the transmitter, set-up times are reduced and precise, long-term stable results are provided.
The portable gas flow meter can be applied at inner pipe diameters ranging from 7 mm up to 1600 mm (no limitations on pipe wall thickness or material) and media temperatures from -40°C up to 100°C. Moreover, the measurement system is independent of the pressure inside the pipe.
With two measurement channels, the FLUXUS G601 portable gas flow meter can also be applied to difficult measurement points and is completely unaffected by gas density, viscosity and composition as well as temperature and pressure. Even wet gas up to Liquid Volume Fractions of 5% can be measured.
Non-invasive flow measurement for precise bi-directional, highly dynamic operational and standard volume flow
Portable, easy-to-use gas flow meter with 2 flow channels, multiple inputs/outputs and an integrated data logger with a serial interface
Automatic loading of calibration data and transducer detection reducing set-up times and providing precise, long-term stable results
Li-Ion battery providing up to 14 hours of remote measurement operation
Highly Accurate due to matched and paired as well as temperature compensated transducers
Transducers available for a wide range of inner pipe diameters (7 mm... 1600 mm)
Proven clamp-on technology, transducers resistant to dust and humidity
Probe for wall thickness measurement available
Water and dust-tight; resistant against oil, many liquids and dirt
Robust, water-tight (IP67 ) transport case with comprehensive accessories
QuickFix for fast mounting of the flow transmitter in difficult conditions
Designed for industrial use in harsh environments, in gas processing and natural gas extraction, the chemical industry and in the petrochemical industry.
- Measurement on natural gas pipelines and in natural gas storage installations
- Measurement of synthesized gas and injection gas
- Measurement for the gas utilities industry
- Supervision of permanently installed meters, service and maintenance
|FLUXUS® G601: The portable Gas Flow Meter for industrial environments|
|Operating temperature of transmitter||-20°C ... +60°C|
Electronic unit: NEMA 4X / IP65 acc. to EN60529
Transport case: NEMA 6 / IP67 acc. to EN60529
|Battery||Li-Ion, 7.2 V/4.5 Ah, > 14 hours operating time|
|Inputs and Outputs|
Inputs: 1 x Pt100 / Pt1000, 2 x current, 1 x voltage
Outputs: 2 x current, 2 x binary, 1 x frequency
|Calculation of the standard volume flow based on AGA-8 / ISO 12213-1||Yes|
|Media temperature||-40°C ... 100°C|
|Pipe diameter range||7 mm ... 1600 mm|
|Operating pressure range||
from atmospheric pressure upwards for plastic pipes
from 5 bar upwards for metal pipes, no upper pressure limitation
|Flow velocity range||0,01 ... 35 m/s (dependent on pipe size)|
1% ... 3% of reading +/- 0,01 m/s, depending on application
0,5% of reading +/- 0,01 m/s, field calibrated