warning: htmlspecialchars() expects parameter 1 to be string, array given in /kunden/284164_12681/webseiten/cms/includes/bootstrap.inc on line 860.

FLUXUS® F601 - The Portable Multi-Functional Flowmeter

FLUXUS ® F 601

Unmatched in Performance

The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters.

The FLUXUS F601 is measurement ready in less than 5 minutes, including the measurement of the pipe wall thickness, the connection of the transducers to the transmitter, the parametrisation of the flow meter and finally the mounting of the transducers.

Though featuring an ergonomic design, which offers simple handling and maximum ease of use, the F601 was designed to easily withstand rough industrial environments. Besides its sturdy housing, the F601 portable flow meter features stable and precise push-pull transducer connectors with the cables themselves being steel armored to prevent breaking or rupturing during daily work.

With its Li-Ion battery, the F601 allows for up to 14 hours of autonomous measurement. Matched and paired transducers as well as sophisticated algorithms care for the correction of pipe wall echoes and a wrong transducer positioning, thus ensuring reliable and highly accurate measurements - even during the most demanding application conditions. Due to the new HybridTrek mode, the portable flow meter can also reliably and accurately measure the liquid flow under conditions with a high content of solid particles or gaseous loads.

The FLUXUS F601 portable clamp-on flow meter is also available in an "Energy" and "Multifunctional" version , allowing the measurement of thermal energy / BTU flows and making the flow meter the ideal companion for the analysis or auditing of heating and chiller plants. The collected data can be used to perform a complete energy balance or to assist during process monitoring and optimization.

Fast, rugged, accurate - the benefits are evident...

Ergonomic, lightweight design and simple handling - reliable results in less than 5 minutes
Rugged for its usage in industrial environments even at difficult measurement points - with two flow channels as standard
Fast measurement: No zero point calibration necessary thanks to Plug & Play transducer recognition (EPROM)
Maximum flexibility for a broad application range with only two pairs of transducers
Bi-directional measurement for nearly all pipe materials and nearly all liquid media - huge internal database
Ideal solution also for thermal energy / BTU metering
Accurate and reliable measurement even under flow conditions with high contents of solids / gas bubbles due to the new HybridTrek mode
High degree of flexibility, e.g. for energy metering, data logging, various In-/Outputs, recording of ext. pressure data

Applications:

General

Service and maintenance
Replacement of defective devices
Support of commissioning process and installation
Performance and efficiency measurement
Evaluation and assessments
Capacity measurement of pumps
Monitoring of regulating valves
Energy efficiency
audits

Chemical Industry

Portable flow controls at start-up and/or inspection of facilities
Helpful tool for facility optimization
Flow measurement of heat transfer media

Water supply / Wastewater services

Leakage control
Treatment dosage
Flow control in water supply networks

Refrigeration and air conditioning systems

Measurement of inlet and outlet flow for service work and maintenance
Pump preventative maintenance and checks
Optimization of energy efficiency
Detection of fouling processes in heat exchangers

Facility management / Energy Metering - BTU

Optimization of heating and air conditioning systems in large building complexes
Pump control

Food and Beverage Industry

CIP and SIP optimization
Consumption optimization

Aeronautical industry

Monitoring of hydraulic and cooling systems of airplanes

Technical Facts:

FLUXUS F601: The Portable Multifunctional Flow Meter
Operating temperature of the transmitter	-10°C ... 60°C
Flow channels	2
Degree of protection
Electronic unit	NEMA 4X / IP65 acc. to EN60529
Transport case	NEMA 6 / IP67 acc. to EN60529
Battery	Li-Ion, 7.2 V/4.5 Ah, > 14 hours operating time
Inputs and outputs
Standard Version	Outputs: 2 x current, 2 x binary,
Energy Version	Inputs: 2 x Pt 100/Pt1000; Outputs: 2 x current, 2 x binary
Multifunctional Version	Inputs: 2 x Pt 100/Pt1000, 2 x current; Outputs: 4 x current, 2 x binary
Media temperature:	-40°C ... 200°C (-160°C ... 400°C with High Temperature WaveInjector mounting fixture)
Pipe diameter range:	10 mm ... 12.000 mm
Flow velocity range:	0,01 ... 25 m/s
Measurement accuracy:	±1.6 % of reading ±0.01 m/s (standard) ±1.2 % of reading ±0.01 m/s (extended calibration) ±0.5% of reading ± 0.01 m/s (field calibrated)